NAXIANG BEARING

May 09,2024

How to disassemble the inner ring of cylindrical roller bearing

How to disassemble the inner ring of cylindrical roller bearing

Pay attention to safety when disassembling and ensure you use the correct tools and methods to avoid damage to the bearings or shafts. If you are not sure how to disassemble, it is recommended to do it under the guidance of experienced personnel.

MORE

May 09,2024

Assembly points of thrust ball bearings

Assembly points of thrust ball bearings

Storage and care. When storing bearings, the warehouse should be kept clean and dry, with the relative humidity not exceeding 65%, and the bearings should not be stored on the floor. Bearings that have been in stock for more than 1 year must be re-cleaned and oiled.

MORE

May 09,2024

The difference between spherical roller bearings and deep groove ball bearings

The difference between spherical roller bearings and deep groove ball bearings

Spherical roller bearings have a lower speed limit than deep groove ball bearings, which means they are not suitable for high-speed rotation applications. Spherical roller bearings are characterized by their large radial load bearing capacity, but basically cannot bear axial loads. This kind of bearing is usually used in applications that need to bear large radial loads.

MORE

May 09,2024

How to disassemble spherical roller bearings

How to disassemble spherical roller bearings

Use appropriate tools and methods for disassembly, and avoid using heavy objects such as hammers to directly hit the bearings to avoid damage. In addition, the bearings should be cleaned and inspected after disassembly to completely remove dirt and grease, and check whether components such as raceways, balls, and cages are intact.

MORE

May 09,2024

Where are external ball bearings mainly used?

Where are external ball bearings mainly used?

Outer spherical bearings have self-aligning properties and are suitable for bearing combined loads mainly radial loads, and are widely used. Suitable for industrial machinery, mining and metallurgical equipment, agricultural machinery and other fields. It can withstand heavy loads, impacts, eccentric and axial loads, and provide stable support for equipment.

MORE

May 09,2024

Advantages and Disadvantages of Needle Roller Bearings

Advantages and Disadvantages of Needle Roller Bearings

Strong carrying capacity. Needle roller bearings can withstand higher loads and are especially suitable for occasions that need to bear large loads and high speeds.

MORE

May 09,2024

Characteristics of cylindrical roller bearings

Characteristics of cylindrical roller bearings

Cylindrical roller bearings with no ribs in the inner ring or outer ring. The inner ring and outer ring can move relative to each other in the axial direction, so they can be used as free-end bearings. Cylindrical roller bearings with double ribs on one side of the inner ring and outer ring and a single rib on the other side of the ring can withstand a certain degree of axial load in one direction.

MORE

May 09,2024

The difference between bearings and bearing bushes

The difference between bearings and bearing bushes

Bearings can be divided into two categories: rolling bearings and sliding bearings. Rolling bearings use rolling elements to roll between the inner and outer rings to support and position the shaft, with high rotation accuracy and efficiency, while sliding bearings use lubricating oil films to support and position the shaft. , has good impact resistance and axial load capacity.

MORE

< 12 > proceed page